GPSDO Clock Discipline & Sub-Microsecond TDOA Geolocation
In distributed RF geolocation, time is distance. Electromagnetic waves propagate at approximately 299.79 meters per microsecond. That means a seemingly tiny 100-microsecond clock skew between two shortwave receivers shifts the computed hyperbolic line of position by nearly 30 kilometers.
Clock Source Accuracy Budget
| Timing Reference | Typical Offset | Equivalent Distance Error | Viable for HF TDOA? |
|---|---|---|---|
| Public Internet NTP | 1–15 ms | 300–4,500 km | No (far too coarse) |
| Local Stratum-1 NTP (USB GPS) | 50–250 µs | 15–75 km | Marginal for regional fixes |
| Embedded GNSS 1PPS / GPSDO | 0.05–1 µs | 15–300 m | Yes (gold standard for KiwiSDR TDOA) |
Checklist for Deploying a Clean TDOA Node
- Mount the active GPS puck outdoors with an unobstructed sky view so at least 6–8 satellites stay locked continuously.
- Avoid running the GPS coax parallel to unshielded switching power bricks or PoE injectors.
- Verify frequency calibration against a standard time-and-frequency broadcast (WWV 5/10 MHz or RWM 4996/9996 kHz).