UVB-76.NET4625 kHz USB
HARDWARE: SDR MK1.5 ANDRUSARCHITECTURE: DIRECT SAMPLINGHF 0.1–30 MHz

SDR Mk1.5 Andrus — Direct-Sampling HF Receiver Architecture

The SDR Mk1.5 Andrus became a milestone open-hardware direct-sampling Software-Defined Radio design among HF listeners and RF experimenters. Unlike inexpensive 8-bit DVB-T dongles that suffer from severe intermodulation distortion near strong AM broadcast transmitters, a dedicated 16-bit direct-sampling front end digitizes the entire 0–30 MHz shortwave spectrum straight at the antenna port after low-pass filtering.

Core Signal Chain Specifications

SubsystemDesign ChoiceEngineering Benefit
RF Front End30 MHz 7th-order Elliptic LPF + RF transformerBlocks FM broadcast aliasing (88–108 MHz) into the first Nyquist zone
Digitizer (ADC)16-bit high-speed ADC (~64–80 MSPS class)~90+ dB blocking dynamic range without front-end overload
Digital Down-ConverterFPGA CIC + FIR decimation pipelineDelivers clean 192 kHz–1.5 MHz complex IQ baseband over USB
Clock ReferenceLow-phase-noise TCXO / external 10 MHz inputPrevents carrier frequency drift during long-duration waterfall logging

Verifying IQ Stream Integrity & Noise Floor

When calibrating a direct-sampling receiver against a 50-ohm terminator, inspect the FFT bin distribution to confirm that ADC dithering is active and no USB bulk-transfer packet drops are introducing phase discontinuities:

import numpy as np

iq = np.fromfile("capture_4625khz_192ksps.cf32", dtype=np.complex64)
psd_db = 10 * np.log10(np.abs(np.fft.fftshift(np.fft.fft(iq[:65536])))**2 + 1e-12)
print(f"Median noise floor: {np.median(psd_db):.2f} dB | Peak: {np.max(psd_db):.2f} dB")

For further context on direct-sampling USB receivers, see Software-Defined Radio architecture on Wikipedia.

Related Guides